Rubber & Plastics
Text
| Characteristics | Silikonska guma | GE silikonska guma | EPDM guma | SBR guma | Prirodna guma | Termoplastični elastomer | Poliamid | Poliamid 6.6 | Poliamid 6.6-15% fiberglasa | Polipropilen | Polietilen, male gustine | Polivinil-hlorid, fleksibilan | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HangOn | Q | GE | EPDM | SBR | NR | TPE | PA6 | PA6.6 | PA6.6-15 | PP | PELD | PVC | |
| Povremena maks. temp (°C) |
315 | 315 | 125* | 100 | 90 | 150 | 160 | 200 | 240** | 150 | 70 | 150 | |
| Stalna maks. temp (°C) |
230 | 230 | 100 | 90 | 80 | 135 | 70 | 90 | 120 | 110 | 50 | 100 | |
| Zatezna čvrstoća (MPa) | 8 | 10 | 12 | 14 | 21 | 8 | 50 | 60 | 100 | 35 | 8 | 50 | |
| Izduženje pri lomu (%) | 400 | 500 | 300 | 500 | 500 | 500 | - | - | - | - | - | 20 | |
| Trajna deformacija | 13% (22h @ 175ºC) |
25% (22h @ 175ºC) |
20% (22h @ 125ºC) |
20% (22h @ 70ºC) |
20% (22h @ 70ºC) |
35% (22h @ 70ºC) |
- | - | - | - | - | - | |
| Tvrdoća (ShA) | 30-80 | 30-80 | 40-80 | 40-80 | 40-80 | 50-95 | 70 (ShD) | 80 (ShD) | 90 (ShD) | 55 (ShD) | 50 (ShD) | 70 (ShD) | |
| Alkali | Manje dobro | Manje dobro | Manje dobro | Manje dobro | Loše | Manje dobro | Odlično | Odlično | Odlično | Veoma dobro | Dobro | Manje dobro | |
| Kiseline | Dobro | Dobro | Odlično | Manje dobro | Manje dobro | Veoma dobro | Manje dobro | Manje dobro | Manje dobro | Odlično | Dobro | Manje dobro | |
| UV | Odlično | Odlično | Veoma dobro | Manje dobro | Manje dobro | Loše | Veoma dobro | Veoma dobro | Veoma dobro | Loše | Loše | Veoma dobro | |
| Abrazija | Loše | Loše | Dobro | Dobro | Odlično | Dobro | - | - | - | - | - | - | |
| Habanje | Loše | Loše | Manje dobro | Manje dobro | Dobro | Veoma dobro | - | - | - | - | - | - | |
| Gustina (g/cm³) | 1,18 | 1,18 | 1,25 | 1,25 | 1,2 | 0,95 | 1,13 | 1,13 | 1,23 | 0,91 | 0,92 | 1,45 | |
| Apsorpcija vode (24 h, 20°C) | 0 | 0 | 0 | <0,1 | <0,1 | <0,1 | 9 | 8 | 6 | <0,1 | <0,1 | <0,1 |
* In powder coating some materials can be used just once, for example EPDM which has a top temperature resistance of 125°C but can actually stand temperatures up to approx. 200°C. EPDM plugs get harder but do not melt.
** Thermoplastics like PA actually start melting at approx. 160°C but can be stabilized in some different ways, for example with a mixture of glass fibres.
A = Excellent, B = Very good, C = Good, D = Fair, E = Poor
Sheet metal
| Characteristics | DC 01 | Ymagine D1 | DX51D Z275 MAC | EN-AW 1050A H14 | EN-AW 1050A H14 | 1.4301 | |
|---|---|---|---|---|---|---|---|
| HangOn | DC 01 | Ymagine | Pre Zink | Alu 1050 | Alu 5005 | Stainless steel | |
| Tensile strength (MPa) | 270-410 | 335-425 | 270-500 | 110-150 | 125-165 | 520-700 | |
| SS | 1142 | - | 1151-10 | 4007 | 4106 | 2333 | |
| DIN | ST12/ST02 | - | DX51D (ST 02 Z) | A1955.5:AA1050-H14 | - | X 5 CrNi 18 10 | |
| W-nr | 1.0330 | - | 1.0226 | 3.0255 | 3.3315 | 1.4301 | |
| EN | EN 10130:2006 | - | EN 10346:2009 | EN-AW 1050A H14 | EN-AW 5005A H12 | EN 10028-7 | |
| AISI | A 366 (1012) 1008 | - | - | - | - |
Wire
| Characteristics | Steel copper drawn | Steel | Spring wire class A (copper drawn) | Spring wire class B (phosphated) | Stainless steel | Stainless steel, acid resistant | Steel zinc-plated | Copper wire (galvanic process) | Stainless steel, high temperature | Construction steel | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HangOn | A | B | C | D | E | E1 | F | G | H | I | |
| ø-dependent Tensile strength (MPa) | 450-1000 | 450-1000 | 1200-1700 | 1500-2000 | 600-900 | 700-1000 | 450-1000 | 300-400 | 700-1000 | 600-1000 | |
| SS | 1311/1312 | 1311/1312 | - | - | 2333 | 2347 | 1311/1312 | - | - | 2172 | |
| DIN | ST37-2 | ST37-2 | - | - | - | - | ST37-2 | - | - | ST52 | |
| W-nr | 1.0036/38 | 1.0036/38 | 1.0586 | - | 1.4308 | 1.4401 | 1.0036/38 | - | 1.4841 | 1.0841 | |
| EN | 10025 | 10025 | 10016-2 | 10204 | 58E | 58J | 10025 | - | - | - | |
| AISI | 1008 | 1008 | 1050 | 1080 | 304 | 316 | 1008 | - | 314 | 5120 |
